Views: 0 Author: Site Editor Publish Time: 2019-01-10 Origin: Site
Daily maintenance of the fitter scribing platform:
1. In order to prevent the deformation of the fitter scribing platform, four lifting holes should be used to hang the four lifting holes on the fitter scribing platform at the same time, and the fitter scribing platform can be smoothly hoisted on the transport tool. .
2. The padding platform support points are padded and leveled to ensure uniform force on each support point, ensuring smoothness of the entire fitter scribing platform.
3. When the fitter scribing platform is installed, the support points of the fitter scribing platform are adjusted and lapped by the adjusting horn, and the professional technicians adjust the qualified precision.
4. When using the stencil scribing platform, gently handle the workpiece. Do not move the rough workpiece on the stencil scribing platform to avoid bumping, scratching and other damage to the working surface of the fitter scribing platform.
5. In order to prevent the overall deformation of the fitter scribing platform, after the use is completed, the workpiece should be taken off the fitter scribing platform to avoid deformation of the workpiece due to heavy pressure on the bench scribing platform for a long time.
6. When the bench is not used, the working surface should be washed in time, then coated with a layer of anti-rust oil, and covered with anti-rust paper. Cover the cast iron plate with the outer packaging of the fitter scribing platform to prevent normal time. Pay attention to damage to the working surface of the cast iron plate.
7. The fitter scribing platform should be installed in a ventilated, dry environment and away from heat sources, corrosive gases, and corrosive liquids.
8. The bench line of the fitter is subject to regular weekly inspection according to the standard. The verification period can be 6-12 months depending on the specific situation.
