News

CROWNMAN Hand Tools with shinning color, good packing, Full line full stock, drills, grinding products, pipe tools, electrical tools, power tools, tools box.

A hand tool is any tool that is powered by hand rather than a motor. Categories of hand tools include wrenches, pliers, cutters, files, striking tools, struck or hammered tools, screwdrivers, vises, clamps, snips, saws, drills and knives. Outdoor too

CROWNAMN full stock hand tools with full quantity always. NO MOQ requirement, Full line of hand tools include pliers, screwdrivers, wrench, hammer, cutting saw, blade, measuring tape.

CROWNMAN Hand Tools always give you best support. Pliers always sharp, robust.

Daily maintenance of the fitter scribing platform

The "inner core" of the tape measure has a small piece of steel inside, which acts like a spring. It can also be thought of, that is, the one above the toy pistol trigger

The model number of the flat-blade screwdriver is expressed as the width of the cutter head*. For example, 2 x 75 mm means that the width of the cutter head is 2 mm and the length of the rod is 75 mm (not full length).

The blade of the screwdriver must be ground correctly, and the sides of the blade should be as parallel as possible. If the blade is tapered, the blade will easily slip out of the screw slot when the screwdriver is turned.

The screwdriver has no round head because the round head has no torque at all. The word is to ensure that there is torque, and the cross allows the power to be distributed more evenly.

Screws are the main fasteners in mechanical equipment. Open-end wrenches are an important tool for processing, production and maintenance in the mechanical industry. This project is a revolution in traditional wrench tools, and it has the following a